SL DI 4 XLR
SL DI 4 XLR

SL DI 4 XLR

SL DI 4 XLR - идеальный интерфейс для беспроводных микрофонных приемников и добавления микрофонного/линейного входа в систему Dante
Артикул № 506848

Описание

The SL DI 4 XLR four input Dante preamp is the ideal interface for wireless microphone receivers, and adding mic/line inputs to a Dante system. The small form factor to the SL DI 4 XLR allows them to be mounted almost anywhere, putting them close to audio sources and minimizing interference-prone analog wiring. The SL DI 4 XLR features four balanced mic/line inputs, each with software selectable +48V phantom power and 8 gain levels. Front panel indicators show each channel’s gain and phantom power status for easy troubleshooting. The SL DI 4 XLR has two network connections to allow Dante Daisy Chaining. Dante Daisy Chaining further simplifies system infrastructure wiring by allowing multiple SL DI 4 XLRs to use a single CAT 5 home run connection to a network switch. Power can also be daisy chained. The SL DI 4 XLR is powered by either external +12VDC or any PoE network switch. All adjustable parameters, like mic/ line gain and phantom power, are software controlled.


Особенности

  • 4 XLR balanced and RF filtered mic/line inputs

  • Gain is individually adjustable per channel via software

  • 802.3af compliant PoE powered to work with any compliant PoE network switch, or an external +12VDC supply

  • +48V Phantom power - powers virtually all types of phantom powered microphones typically used in installed AV systems.

  • Phantom power is switchable per channel via software

  • ID LED allows easy identification of the SL DI 4 XLR

  • Dante Daisy Chaining allows multiple SL DI 4 XLRs to be

  • connected over a single home-run to the Ethernet switch


Что в коробке?

  • SL DI 4 XLR

Технические характеристики

  • Потребляемая мощность
    500 mA
  • Фантомное питание
    P 48
  • Источник питания
    12 V DC
  • Включение
    12V DC or 802.3af PoE
  • Связь
    Dante Interface
  • Соединение
    Audio In: 4x XLR3F Ethernet / Dante ™: 2x RJ 45 (1x with PoE) PowerLink: 2x 2pole connector

Загрузки

  • Спецификация
  • ЕС декларация соответствия
  • Installer for Config-Software
  • Обновление ПО
    • Dante Firmware Update for SL DI 4 XLR (520 KB) Скачать

      Audinate Firmware Update Manager is required. Available at: www.audinate.com/products/firmware-update-manager

  • Инструкция по эксплуатации
    • Instruction manual SL DI 4 XLR Скачать

      Instruction manual for the SL DI 4 XLR as part of the SpeechLine Digital Wireless system instruction manual.

  • Рекомендации по применению
    • Dante Firmware Update using the Audinate Firmware Update Manager (110 KB) Скачать